Screw mount Leica Accessory
A concave lens is put on the center. It will become Galilei type telescope with the rear cap, makes 3.5x for 50mm lens and 6x for 90mm lens. Made by Ernst Leitz GmbH Wetzlar Germany.
The Elmar 5cm used to be as an enlargement lens on the old ages. This hood was so as to set the Elmar's aperture easy when enlargement was processed. It is also very much useful for taking photograph as a lens shade and possible to set the recent aperture value like 3.5, 4, 5.6, 8, 11 when the Elmar had an old series number of aperture like 3.5, 4.5, 6.3, 9. Made by Ernst Leitz GmbH Wetzlar Germany.  There were no synchro terminal the Leica before model IIIC. This attachment is possible to get an synchro contact for old screw mount Leicas. It synchronize with 1/30 sec. Made in Germany.  
The filter pivots the view finder side and lens side, it rotates just 180 degree. We can see through the view finder for the effect of PL filter first, then rotate it on the front of lens. Fit for Sumitar 5cm f2 lens. Made by New York Leitz.
  Right angle finder for side object. Set accessory shoe, then slide a small mirror and you will see the image of range finder. It is able to use as a regular when the mirror is up. Made by Ernst Leitz Wetzlar.   It takes close up focusing from 1 meter to 44cm with coupled range finder. Parallax is automatically compensated. Made by Ernst Leitz GmbH Wetzlar Germany in 1935. Here is a Sample work of NOOKY. 
SOMKY Close-up attachment for M Leica.It is possible to use Summicron F2 50mm(collapsible) and F2.8 50mm Elmar for M mount Leica. Made by Ernst Leitz GmbH Wetzlar Germany in 1956.  Universal hood for three Elmar lenses, 50, 90 and 135mm. Made by Ernst Leitz GmbH Wetzlar Germany.
Leitz original neck strap. Engraved "Leitz Wetzlar Germany". It is soft but so strong that they said it might be able to pull a cattle. 
Leitz CHICOLeitz original Flash gun for Leica IIIf.  Special blacket can connect non-code operation like hot shoe. |